DVP06XA-S
Analog I/O Module
● 4 points of analog input voltage (-10 V ~ +10 V) / current (-20 mA ~ +20 mA)
● 2 points of analog output voltage (0 V ~ +10 V) / current (0 mA ~ +20 mA)
● Input / output resolution: 12-bit
● Built-in RS-485 interface
● Single-ended input
-
Product category
-
sub-category
-
Partner name
-
Series name
Attributes
PLC Module
Expansion ModuleI/O Selection
Mix AI/AOSupply
24VDCOutput Type
N.A.In Built
NO
| Type | Expansion Module | Input/Output | Mix AI/AO | Ethernet | NO |
| Output Type | N.A. | HSC | N.A. | PTO | N.A. |
| Resolution | 12-Bit |
The analog input/output module DVP06XA-S receives external 4-point analog signal input (voltage or current) and converts it into 12-bit digital signals. DVP06XA-S receives two pieces of 12-bit digital data from a PLC and converts the digital data into 2-point analog signal output (voltage or current). There are 49 CRs (control registers) in the module, and each register has 16 bits. A DVP series slim type PLC can read data from DVP06XA-S or write data to DVP06XA-S by means of the instruction FROM/TO.
