NA2-N28
General Purpose & Slim Body Area Sensor
● Sensing Height : 540 mm
● Sensing Range : 5 m
● Output : NPN
● Fixed Cable, 3m
-
Product category
-
Partner name
-
Series name
Attributes
Sensing Height
540 mmSensing Range
5 mOutput
NPNBeam Pitch
20 mmSensing Object Size
Phi 30mmConnection Type
Fixed Cable, 3m
Type | Thru-beam | Shape | Rectangular | Sensing Height | 540 mm |
Sensing Range | 5 m | Output | NPN | Output Operation | NC |
Input supply | 12 to 24 VDC | Emitting Element | Infrared LED | Connection Type | Fixed Cable, 3m |
Beam Pitch | 20 mm | No. Beam Channels | 28 | Sensing Object Size | ø30 mm |
Response Time | < 10 ms | Enclosure | Heat-resistance ABS | Protection | IP40 (IEC) |
Particular Characteristics | – |
The slim-bodied NA2-N series fits right in your equipment, since it is only 13 mm 0.512 in thick and 30 mm 1.181 in wide. It dose not get in the way of your access to the machine. Both the receiver and the emitter feature job indicators, 102 mm 4.016 in wide, with red bright LEDs. When the sensing output and the job indicator input are connected, the job indicator can be used as a large operation indicator.By setting different emission frequencies for two sensors, mutual interference can be prevented. There is no problem even when the sensors are parallel installed for wide detections area coverage. Moreover, the set frequencies can be identified by how many times the emitting indicators is light up.The operation of the job indicator can be selected using the operation mode selection switch. Beam output can be stopped via the input of an external signal. This is an useful test input (emission halt) function when beginning operation.