Light Curtains are made up of arrayed emitting and receiving elements. The international standard IEC 61596 specifies requirements for the design, construction, and testing of two levels or "types" of light curtains or screens. Type 2 and Type 4 describe...

While regular sensors detect the existence of objects, displacement sensors detect the amount of displacement when objects move from one position to another. Detecting the amount of displacement allows you to measure the height and thickness of the objects.

A pressure sensor converts changes in pressure of a gas or a liquid into an electrical signal by means of a pressure sensing device and generates an analog output proportional to the pressure or a switching output that operates at...

Proximity sensors are sensors that detect when a target object such as a metal has approached (or receded), without making direct contact with the object. Principle of high-frequency oscillation type: The detection coil located at the front end of the...

The area sensor is made up of arrayed emitting and receiving elements. - Object is detectable as long as it is anywhere in the defined sensing area. - Not affected by the shape, color, or material of sensing objects (opaque)....

The photoelectric sensor is a generic name for sensors that detect an object by using light. The optical signal transmitted from the emitting part of the sensor is modified by being reflected, transmitted, absorbed, etc., by the sensing object and...

In the Micro-Photoelectric sensor, the emitter and the receiver are in one enclosure. No beam alignment is needed Precise detection Small object detectable Not affected by the shape, color, or material of sensing objects (opaque) Resistant to dirt and dust...

LASER is an acronym for "Light Amplification by Stimulated Emission of Radiation". It is a device that radiates coherent light by excitation of molecules in a gas, or electrons in a solid, to a high energy stage and their release...

Fiber sensors refer to those photoelectric sensors that use optical fiber for the detector, and one of their primary benefits is that they offer a wide variety of detectors (that is, fiber units) for use in different applications. Fiber sensors...

Panasonic Machine vision encompasses all industrial and non-industrial applications in which a combination of hardware and software provide operational guidance to devices in the execution of their functions based on the capture and processing of images.Vision System includes innovation and...

Projects a spot-beam on the target color, and identifies the color by sensing the amount of reflected beam and the relative ratio among color components, Or projects a spot-beam on an object, and identifies the color by the proportion of...

Magnelimit : The integrated structure of the magnet (holding) and switch (detection) reduces the required space and installation workload. Accurate open/close detection is available. A switch that makes electrical construction possible at 100 V AC power, The built-in magnet safeguards...

Panasonic AC Gear Motor is an all-in-one combination of an electric motor and a Gear Box. This makes it a simple, cost-effective solution for high-torque, low-speed applications because it combines a motor with a gear reducer system. A gearbox known...

Brushless motors use the induction of a rotating magnetic field in the stator to turn the rotor and stator at the same rate. Like DC motors, these are permanent-magnet synchronous motors, or PMSMs, that rely upon magnets built into the...

Servo motors a rotary motion that allows for precise control of angular or linear position, velocity and acceleration. It consists of a suitable motor coupled to a sensor for position feedback. Servo Motor is a synchronous motor (Permanent Magnet Motor)....