MGate 5118

Converter Type	EtherNet/IP Gateways	Protocol from	CAN-J1939	Protocol to	Modbus/PROFINET/ EtherNet/IP
Ethernet Port	2 PORT 10/100BaseT(X) Ports (RJ45 connector)	Serial Port	RS-232/422/485	Input Voltage	12 to 48 VDC
IP	IP30	Mounting	–	Dimensions	45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)
Weight	589 g (1.30 lb)	Housing	Metal	Operating Temperature	0 to 60°C (32 to 140°F)
Warranty Period	5 YEARS

The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU

The MGate 5118 gateways support the conversion of J1939 data to Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments

● Embedded traffic monitoring/diagnostic information for easy troubleshooting

● microSD card for configuration backup/duplication and event logs

● Status monitoring and fault protection for easy maintenance

● CAN bus and serial port with 2 kV isolation protection

● -40 to 75°C wide operating temperature models available

● Security features based on IEC 62443