MGate MB3170I-T

Converter Type	Modbus TCP Gateway	Protocol from	advanced serial	Protocol to	Ethernet Modbus gateways
Ethernet Port	2 PORT 10/100BaseT(X) Ports (RJ45 connector)	Serial Port	1 RS-232/422/485	Input Voltage	12 VDC
IP	IP30	Mounting	–	Dimensions	Dimensions (with ears) 29 x 89.2 x 124.5 mm (1.14 x 3.51 x 4.90 in) Dimensions (without ears) 29 x 89.2 x 118.5 mm (1.14 x 3.51 x 4.67 in)
Weight	360 g (0.79 lb)	Housing	Plastic	Operating Temperature	-40 to 75°C (-40 to 167°F)
Warranty Period	5 years

The MGate MB3170 and MB3270 are 1 and 2-port Modbus gateways, respectively, that convert between Modbus TCP, ASCII, and RTU communications protocols. The gateways provide both serial-to-Ethernet communication and serial (master) to serial (slave) communications. In addition, the gateways support simultaneously connecting serial and Ethernet masters with serial Modbus devices. The MGate MB3170 and MB3270 Series gateways can be accessed by up to 32 TCP master/clients or connect to up to 32 TCP slave/servers. Routing through the serial ports can be controlled by IP address, TCP port number, or ID mapping. A featured priority control function allows urgent commands to obtain an immediate response. All models are rugged, DIN-rail mountable, and offer optional built-in optical isolation for serial signals.

● 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST connector)

● Emergency request tunnels ensure QoS control

● Embedded Modbus traffic monitoring for easy troubleshooting

● Serial port with 2 kV isolation protection (for “-I” models)

● -40 to 75°C wide operating temperature models available

● Supports redundant dual DC power inputs and 1 relay output