VFD3550CP43A-00
Delta Fan/Pump Vector Control Drive
● Sensorless Vector Control (SVC)
● Hot pluggable LCD keypad
● Built-in PLC function
● Networking drive system
● Auto energy saving
● Excellent variable torque control of asynchronous motors
-
Product category
-
sub-category
-
Partner name
-
Series name
Attributes
Supply Type (Ø)
3-Phase, 415VKW
355KWHP
475Rated output current
616Amp.
KW | 355KW | HP | 475HP | Input Supply | 3-Phase, 415V |
Output Current | 616Amp. | Braking Chopper | Built in up to 50HP | Output Frequency (HZ) | 230 V model: 599.00 (55 kW and above: 400.00) 460 V model: 599.00 (90 kW and above: 400.00) |
PID Function | Built in | PLC Function | Built-in PLC (10k steps) | MODBUS COM | Built in |
CANopen | Optional | PROFIBUS DP | Optional | PROFINET | Optional |
DeviceNet | Optional | Modbus TCP | Optional | EtherNet/IP | Optional |
EtherCAT | NA | BACnet | Optional | PG Close Loop | NA |
KEYPAD | Built in Detachable | Control Mode | 1: V / F (V / F control) 2: SVC (Sensorless Vector Control) 3: PM (Permanent Magnet Motor) |
● With a built-in 10K steps Delta PLC allows users to execute distributional control and independent control when connecting to a network system. Delta CP2000 series drives provide you the intelligent control possibility beyond your imagination.
● The calendar function allows users to program the PLC procedure, the ON/OFF in chronological order, the daylight saving time and etc.
● A wide range of models (0.75~630KW) to fulfill the demands of different industries.
● The modularized design eases maintenance and expansion.
● High speed communication interfaces with MODBUS protocol and BACnet protocol built-in.
● Diverse communication methods to satisfy clients@@ needs on multi-controls. So the following options are available for you: the Profi BUS-DP, the DeviceNet, the MODBUS TCP, the Ethernet-IP, and the CANopen Cards.
● Long-life design and self diagnosis for key components.
● Special PCB coating design (Printed Circuit Board) for enhancing environmental tolerance.
● Complied with global safety standards: CE, UL, and cUL
● Standard LCD model (IP20/NEMA1) with built-in PLC to support up to 10K steps
● Heat-sink design. Able to operate at 50°C ambient temperature and to adjust automatically rated output value to make the AC drive work continuously.
● Run fire mode while emergency to have uninterrupted smoke releasing and pressure adding
● Multi pumps control at fixed amount, fixed time circulating control. Able to control 8 pumps at the same time. (Such as Image01 and Image02, optional multi-control relay card is required.)