Stepper Driver

Stepper Driver

Stepper Driver

RTA Stepper Driver comes with Full-digital functioning, both in open-loop and closed-loop. It has ultimate performance and precision, merged with easy use and small dimensions. The stepper driver contains high reliability and life expectancy, even in harsh environments with low acoustic noise; optimized and stabilized thermal behavior. It has an Electronic damping facility for further acoustic noise & mechanical vibrations reduction.

 ● Range Of Operating Voltage: 24-85V DC & 110-230V AC
 ● Range Of Current: 0.6-12.0 Amps
 ● Microstepping Range: 400,800,1600,3200,6400,12800 Steps/revolution
 ● Support CANopen, EtherCAT communication
 ● High Efficiency CHOPPER with MOSFET final stage output

  • ADW

    ADW is the new R.T.A. electronic drive designed for all applications where accurate Speed Control is needed. The motor velocity can be regulated in 3 ways: Analog voltage input, External Potentiometer, and Internal speed settings. The extended ADW power range...

  • PLUS K

    Series of mini step bipolar chopper drives with an on-board programmable motion controller that can be used: -for the interfacing, through RS-485 serial line, with a central control system -as an independent unit. Compact system equipped with dedicated instructions optimized...

  • EUROCARD

    Stepping motor drives series with Step & Direction interface and realized with SMD technology in single EUROCARD format card(100x160 mm).system backward-compatible with the previous series (with PTH technology) equipped with a 32 pole, DIN 41612 form D connector, Drives designed...

  • HI-MOD

    Series of stepper motors with integrated mini step bipolar chopper drives equipped with STEP & DIRECTION interface. Compact system housed in a metallic box mounted on the motor body, minimizing dimensions and optimizing wiring and mounting easiness. Target: distributed electronics...

  • X-MIND K

    Series of mini step bipolar chopper drives with direct input from main AC Power supply (110-230 VAC) and an on-board programmable motion controller that can be used for the interfacing, through RS-485 serial line, with a central control system -as...

  • X-MIND B

    Stepping motor drives series with Step & Direction interface and direct input from the main AC Power Supply(from 110 Vac to 230Vac). The drive is equipped with an internal rectifier able to transfer more than 330 Vdc(230 Vac) to the...

  • X-PLUS ET

    New series of Stepping motor drive with EtherCAT interface and direct input from main AC Power supply(110-230 VAC). Drives optimized for coupling with SANYO DENKI stepping motors, fitted with encoder. Possibility to be connected directly from the main(from 110 to...

  • X-PLUS B

    New Series of bipolar microstep stepping motor drives with power input directly from the main AC Power Supply(from 110 Vac to 230Vac), Specially developed for applications requiring high performance with reduced acoustic noise and low vibrations. Target: advanced applications requiring...

  • PLUS ET

    New series of Stepping motor drives with EtherCAT interface, based on the following Versions: -PLUS ET A3: with DC Power Supply (39-85 Vdc). PLUS ET B3: with AC Power Supply (28-62 Vac). Drives optimized for coupling with SANYO DENKI stepping...

  • PLUS L

    Series of mini step bipolar chopper drives with an on-board programmable motion controller that can be used: -for the interfacing, through RS-485 serial line, with a central control system -as an independent unit. Optimized for driving R.T.A. EM series stepping...

  • PLUS J

    Series of mini step bipolar chopper drives with an on-board programmable motion controller that can be used: -for the interfacing, through RS-485 serial line, with a central control system -as an independent unit.*Presence of dedicated analog input for the setting...

  • PLUS E

    Stepping motor drives series with Step & Direction interface suitable for driving two phase stepping motors, with four, six, or eight terminals. Optimized for driving R.T.A. EM series stepping motors with encoder(86mm and 60mm flange sizes). Target: applications requiring EM...

  • PLUS A/B

    Stepping motor drive with Step & Direction interface suitable for driving medium low power two phase stepping motors, with four, six, or eight terminals based on following versions: PLUS A3 and PLUS A4: with DC Power Supply (39-140 Vdc) -PLUS...

  • SAC

    Series of mini step bipolar chopper drives, suitable for driving medium low power two phase stepping motors, with four, six, or eight terminals.Compact, easy to use, and cost effective solution. This system is designed for easy mounting inside a metallic...

  • HGD

    Series of mini step bipolar chopper drives, suitable for driving medium low power two phase stepping motors, with four, six, or eight terminals.Highly Compact(70x25x25 mm),easy to use and cost effective solution.This system is designed to be soldered to a PCB.Target:...

  • A-NDC

    New Series of bipolar microstep stepping motor drives specially developed for applications sensitive to acoustic noise and vibration. Significant evolution of the NDC series, preserving backward mechanical, electrical, and applicative compatibility.Target: advanced applications requiring high precision, smoothness of movement, and...

  • NDC

    Series of mini step bipolar chopper drives, suitable for driving medium low power two phase stepping motors, with four, six, or eight terminals.Compact, easy to use, and cost effective solution. This system is designed for easy mounting inside a metallic...

  • A-CSD

    New Series of bipolar microstep stepping motor drives specially developed for applications sensitive to acoustic noise and vibration. Significant evolution of the CSD series, preserving backward mechanical, electrical, and applicative compatibility. Target advanced applications requiring high precision, smoothness of movement,...

  • CSD

    New Series of ministerp bipolar chopper drives, suitable for driving medium low power two phase stepping motors, with four, six, or eight terminals.Highly compact, easy to use, and cost effective solution. This system is designed for easy mounting inside a...

  • BSD

    New Series of micro-step stepping motor drives specially developed for small and mid size stepping motors. Ultra compact and optimized design to reduce space and cost, combined with adaptive micro stepping technology ensuring noise and vibration suppression.Target simple and effective...

Lubi Electronics
Logo