MGate MB3270

 2-port advanced serial-to-Ethernet Modbus gateways

 ● Supports Auto Device Routing for easy configuration

 ● Supports route by TCP port or IP address for flexible deployment

 ● Connects up to 32 Modbus TCP servers

 ● Connects up to 31 or 62 Modbus RTU/ASCII slaves

 ● Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master)

 ● Supports Modbus serial master to Modbus serial slave communications

 ● Built-in Ethernet cascading for easy wiring

Attributes

  • Protocol Device 1

    advanced serial
  • Protocol Device 2

    Ethernet Modbus gateways
SKU: MGate MB3270 Category:
Converter Type Modbus TCP Gateway Protocol from advanced serial Protocol to Ethernet Modbus gateways
Ethernet Port 2 PORT 10/100BaseT(X)
Ports (RJ45 connector)
Serial Port 2 RS-232/422/485 Input Voltage 12 VDC
IP IP30 Mounting Dimensions Dimensions (with ears)
29 x 89.2 x 124.5 mm
(1.14 x 3.51 x 4.90 in)
Dimensions (without ears)
29 x 89.2 x 118.5 mm
(1.14 x 3.51 x 4.67 in)
Weight 380 g (0.84 lb) Housing Plastic Operating Temperature 0 to 60°C (32 to 140°F)
Warranty Period 5 years

The MGate MB3170 and MB3270 are 1 and 2-port Modbus gateways, respectively, that convert between Modbus TCP, ASCII, and RTU communications protocols. The gateways provide both serial-to-Ethernet communication and serial (master) to serial (slave) communications. In addition, the gateways support simultaneously connecting serial and Ethernet masters with serial Modbus devices. The MGate MB3170 and MB3270 Series gateways can be accessed by up to 32 TCP master/clients or connect to up to 32 TCP slave/servers. Routing through the serial ports can be controlled by IP address, TCP port number, or ID mapping. A featured priority control function allows urgent commands to obtain an immediate response. All models are rugged, DIN-rail mountable, and offer optional built-in optical isolation for serial signals.

● 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST connector)

● Emergency request tunnels ensure QoS control

● Embedded Modbus traffic monitoring for easy troubleshooting

● Serial port with 2 kV isolation protection (for “-I” models)

● -40 to 75°C wide operating temperature models available

● Supports redundant dual DC power inputs and 1 relay output

Download Datasheet
Download Catalogue
Sit amet, consectetur adipiscing elit. Ut elit
Lorem ipsum dolor sit amet, consectetur adipiscing elit.
20+ Years of Industrial Experience
Lubi Electronics
Logo